INTRODUCTION
CONTENTS
CONTENTS
INTRODUCTION ..................................................................P 5
INSTALLATION ....................................................................P 7
STANDARD CONNECTIONS................................................P 9
GETTING STARTED..............................................................P 11
PLAYING A DVD-VIDEO DISC..............................................P 12
PLAYING A VIDEO CD..........................................................P 16
PLAYING AN AUDIO CD ......................................................P 18
SETTINGS ............................................................................P 20
PARENTAL CONTROL ..........................................................P 22
BEFORE REQUESTING SERVICE ..........................................P 23
DVD-VIDEO
THE ENTERTAINMENT MEDIUM FOR THE MILLENIUM
DIGITAL VIDEO
Video was never like this before! Perfect digital studio-quality
pictures with truly 3-dimensional digital multichannel audio.
Story sequences screened from your own choice of camera
angle.
Language barriers broken down by sound tracks in as many as
eight languages, plus subtitles - if available on disc - in as
many as 32. And whether you watch DVD-Video on wide-
screen or regular TV, you always see it the way it was meant
to be.
DVD-Video uses state-of-the-art MPEG2 data compression
technology to register an entire movie on a single 5-inch disc.
DVD’s variable bitrate compression, running at up to 9.8
Mbits/second, captures even the most complex pictures in
their original quality.
The crystal-clear digital pictures have a horizontal resolution
of over 500 lines, with 720 pixels (picture elements) to each
line. This resolution is more than double that of VHS, superior
to Laser Disc, and entirely comparable with digital masters
made in recording studios.
Manufactured under license from Dolby Labaratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Labaratories. Confidential Unpublished Works.
©1992-1999 Dolby Labaratories Inc. All rights reserved.
DVD-Video discs conform to either the PAL or NTSC video
standard. This dual-standard player can play both types, and
present them in the best possible way on your multistandard
TV screen.
As the universal video system of the future, DVD-Video offers
optimal pictures on any TV screen.
5
english
INSTALLATION
DVD7X0 DVD/VIDEO CD/CD PLAYER
STOP
PLAY
REPEAT
PREV
NEXT
SHUFFLE PAUSE
A
REPEAT
TITLE
TITLE
TOTAL REM
TIME
.
.
.
.
.
.
.
.
.
.
.
.
.
.
10 11 12 13 14 15
+
1
2
3
4
5
6
7
8
9
PAUSE
OPEN/CLOSE
M PEG
Multichannel
DIGITAL OUT
ON/OFF
1
2
3
4
5 6 7
8
9 10
FRONT OF PLAYER
1
ON/OFF
2
3
4
5
Disc tray
Tray OPEN/CLOSE
Display
REPEAT/chapter/track/title/disc
6 OPREVious title/chapter/track
7 PNEXT title/chapter/track
8 9STOP
9 ; PAUSE/Still/Step
0 2PLAY
20
18
16
14
12
10
8
6
4
2
21
19
17
15
13
11
9
7
5
3
1
1
2
3
4 5
6
7
REAR OF PLAYER
1
Power supply
2
3
Digital audio output
Audio R; Audio output R
Audio L; Audio output L
Video (CVBS); Video output
4
5
6
7
CAUTION
DC Power output (for optional external RF modulator)
A/V Euroconnector
Do not touch the inner pins of rear-panel connectors.
Electrostatic discharge may cause permanent damage
to the unit.
NTSC/PAL switch (for player menus)
7
english
1
2
3
4
5
6
7
8
Remote control active (flashing)
FTS (Favourite Track Selection) active
SHUFFLE active
TOTAL REM TRACK TIME
7
1
1
1
1
1
1
INSTALLATION
1
2
3
4
5
6
DISPLAY
SHUFFLE PAUSE SCAN A-B REPEAT CHAPTER TITLE TRACK
TITLE CHAPTER TRACK
VCD
.
.
.
.
.
.
.
.
.
.
. .
. .
7
.
.
.
.
.
.
.
.
.
.
.
.
.
.
+
+
1
1
2
2
3
3
4
4
5
5
6
6
8
8
9
9
10 11 12 13 14 15
PAUSE active
10
7
12
11
9
8
SCAN active
A-B REPEAT/CHAPTER/TITLE/TRACK mode active
Chapter or track calendar
TOTAL/REMaining/TRACK TIME in hours, minutes and
seconds
9
0
!
@
(V)CD disc inserted
DVD disc inserted
DVD CHAPTER or VCD/CD TRACK number
DVD TITLE number
REMOTE CONTROL
OSD
+ j
1
OSD ........(On-Screen Display) on/off
1
2
9
ANGLE
SUBTITLE
AUDIO
2
ANGLE ....select DVD camera angle
....
SUBTITLE language selector or subtitle on/off
1
4
7
2
5
8
0
3
6
9
AUDIO ............spoken language selector
3
4
5
3 0-9....................numerical key pad
4 T-C ..................title/chapter mode selector
T-CRETURN
5 MENU ............select DVD-defined menu
OK....................acknowledge menu selection.
b o l r up/down/left/right cursor movement
8
MENU
OK
6 5 J ............previous chapter or track / search back
6 K ............next chapter or track/ search forward
2......................play
6
7
;......................pause or still frame /step frame
..................slow motion (1/2, 1/4, 1/8 speed)
9......................stop
SETUP
A-B REPEAT
SHUFFLE
SCAN
7 SETUP ............select player settings menu (in stop mode
only)
REPEAT*/A-B REPEAT chapter, track, title, disc
SHUFFLE/SCAN* shuffle or scan on/off
8 RETURN..........go back to previous menu step
9
..................standby
* Press key for about 1 second
8
english
STANDARD CONNECTIONS
GENERAL NOTE
EXCELLENT A/V CONNECTION
- Depending on your TV and other equipment, there are vari-
ous ways you could connect the DVD-Video player. These
are shown below.
VIDEO AUDIO
IN
IN
- Please refer to your TV, VCR, Stereo System and any other
User Manual(s) as necessary to make the optimal connec-
tions.
TV
20
18
1
1
10
8
6
4
2
21
19
17
15
13
11
9
7
5
3
1
VIDEO CABLE
HIGHEST QUALITY A/V CONNECTION
AUDIO CABLE
Connection to a TV with a video (CVBS) socket.
1 Connect the Video socket on the rear of the player to the
corresponding socket on the TV using the cable supplied.
TV
2 Connect the audio Left and Right channel sockets on the
rear of the player to the corresponding sockets on the TV
using the cable supplied. Alternatively, you can use the
same cable to connect the audio Left and Right sockets on
the rear of the player to the corresponding sockets on your
stereo system.
1
1
1
12
10
8
6
21
19
17
15
13
11
7
5
3
1
A/V EUROCONNECTOR CABLE
CAUTION
Connection to a TV with an A/V Euroconnector socket.
Do not connect the player’s audio output to the phono
input of your stereo system.
1 Connect the A/V Euroconnector on the rear of the player to
the corresponding connector on the TV using the cable sup-
plied.
2 Optionally you can also connect the audio Left and Right
channel sockets on the rear of the player to the correspond-
ing sockets on your stereo system.
NOTE
- Do not connect your DVD-player via your VCR, because the
video quality could be distorted by the copy protected sys-
tem.
9
english
STANDARD CONNECTIONS
MULTICHANNEL SOUND FOR HOME THEATRE
DIGITAL AUDIO (STEREO) SOUND
CONNECTION
For this connection, which produces the highest possible
stereo sound quality, you need an audio amplifier with digital
input, and the digital output of the player must be activated
(see Settings p. 20). Connect the player’s digital audio output
to the corresponding input on the amplifier. In this case, do
not use the player’s audio Left and Right outputs.
DIGITAL AUDIO
IN
RECEIVER
2
1
16
14
12
10
2
21
19
17
15
13
11
9
7
5
3
1
DIGITAL AUDIO
CABLE
NTSC/PAL SETTING
Use the NTSC/PAL switch on the rear of the player to set the
Video CD and player menu according to the standard used by
your TV-set.
For multichannel sound, your player provides both digital and
analog audio outputs.
NOTE
DIGITAL (MPEG 2 MULTICHANNEL OR DOLBY
DIGITAL™) MULTICHANNEL SOUND
- The video output standard for video CD and DVD-Video discs
most corresponds to the disc being played.
1 For this, which provides the highest multichannel sound
quality, you need a digital multichannel A/V receiver.
CONNECTING THE POWER SUPPLY
2 Connect the digital audio output on the rear of the player to
a suitable input on the receiver using a digital audio cable
(available as option). In this case, do not use the player’s
audio Left and Right outputs.
1 Plug the female end of the power cord supplied into the
Power connector on the rear of the player.
2 Plug the male end of the cord into an AC outlet.
3 You will need to activate the digital output of the player
(See Settings p. 20).
NOTE
- The player automatically adjust to the local AC voltage.
4 The audio format of the digital output is dependent on the
audio format of the selected audio stream. Make sure that
the selected audio stream matches the capabilities of the
receiver connected to the digital output.
- When the player is in the “OFF” position, it still consumes
some power. If you wish to disconnect your player com-
pletely from the power supply, withdraw the plug from the
AC Outlet.
ANALOG (DOLBY PRO LOGIC™) MULTICHANNEL
SOUND
CAUTION
1 If your TV set has a Dolby Pro Logic™ decoder, simply hook
up the player to the TV using the A/V Euroconnector, or
Video (CVBS) and audio connections as on p. 9.
Only qualified service personnel should remove the
cover or attempt to service this device.
2 If not, make the A/V Euroconnector, or Video (CVBS) con-
nection to the TV p. 9, and connect the player’s audio Left
and Right outputs to suitable inputs on a Dolby Pro Logic™
Audio/Video receiver, using the cable supplied.
3 For speaker connections, follow the instructions given in
the TV set or A/V receiver user manual.
NOTE
-
You cannot use the RF Modulator option for home theatre.
- If the audio format of the digital output does not match the
ceapanbilitiges olf yiousr rehceiver, the sound will be muted.
10
STANDARD CONNECTIONS
GETTING STARTED
OPERATION
INFRARED REMOTE CONTROL
LOADING THE BATTERIES
NOTE
- Unless otherwise mentioned, all operations can be carried
out with the remote control. Always point the remote con-
trol directly at the player, making sure there are no obstruc-
tions in the path of the infrared beam.
1 Open the battery compartment cover.
2 Insert two 'AAA' (R03) batteries as indicated inside the
battery compartment.
- When there are corresponding keys on the front panel, they
can also be used.
3 Close the cover.
CAUTION
Do not mix old and new batteries. and NEVER mix dif-
ferent types of batteries (standard, alkaline and so on).
SWITCHING ON
1 Switch on the TV and select the video input for your DVD-
Video player.
2 To enjoy sound through your stereo system, turn on the sys-
tem and select the source input for the DVD-Video player.
or
To enjoy DVD-Video with multichannel (surround) sound,
switch on the Home Theatre system and select the source
input for your DVD-Video player.
3 On the front of the DVD-Video player, press ON/OFF. The
player display lights, and the OSD invites you to insert a
disc.
4 With Autoplay on (the factory setting) any disc already
inserted in the player starts to play.
Insert disc
11
english
GETTING STARTED
PLAYING A DVD-VIDEO DISC
INSERTING A DISC
PLAYING A DVD-VIDEO DISC
You will recognize DVD-Video discs by the
logo. Depending on the material on the disc
(a movie, video clips, a drama series, etc.)
it may have one or more Titles, and each
Title may have one or more Chapters. Play stops at the end of
each Title. To make access easy and convenient, your player
lets you move between Titles, and also between Chapters.
F
F
DVD-VIDEO DISC
DVD7X0 DVD/VIDEO CD/CD
S
.
H
U
T
F
F
IT
L
L
E
E
P
A
U
S
E
P
A
TITLE 1
TITLE 2
R
0
E
P
E
A
T
1
.
2
.
.
T
.
T
IT
3
O
T
L
A
L
E
4
R
E
M
5
.
.
6
7
.
T
IM
E
8
.
.
9
1
.
1
1
1
2
.
OPEN/CLOSE
1
3
.
1
4
.
1
5+
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2
CHAPTER 3
1 Press OPEN/CLOSE on the front of the player. The disc tray
opens.
NOTE
- During play, various icons will appear on the TV screen for
about 2 seconds to confirm that a function has been select-
ed. You can get rid of these icons by pressing OSD.
2 Lay your chosen disc in the tray, label side up. Make sure it
is sitting properly in the correct recess.
3 Gently push the tray, or press OPEN/CLOSE, to close the
tray.
- At any time during play, you can press OSD to call up the
Play Banner, which shows you which functions are active,
for about 2 seconds. To keep the Play Banner on the screen,
hold down OSD for a couple of seconds. To get rid of the
Play Banner, press OSD again.
- With Autoplay on (the factory setting) play starts.
- With Autoplay off, the (play) screen for the type of disc
inserted appears on the OSD, and information about the
disc’s contents and total playing time appear on the
display.
- List of icons:
- To turn Autoplay off or on, see Settings (p. 20).
..........................................Play
..........................................Pause
..........................................Stop
NOTE
- Since it is usual for DVD movies to be released at different
times in different regions of the world, all players have
region codes, and discs can have an optional region code. If
you insert a disc of a different region code to your player,
you will see the region code notice on the screen. The disc
will not play, and should be removed.
A - B
..........................................A-B repeat
..................................Search forward
..................................Search backward
1/2
1/4
1/8
........................Slow forward
..........................................Repeat disc
..........................................Repeat title
..........................................Repeat chapter
..........................................Chapter shuffle
..........................................Title indication
T
C
chapter
shuffle
TITLE
02
..........................................Chapter indication
..........................................Disable function
..........................................Angle
CHAPT
004
3
7
..........................................No alternative angle
..........................................Subtitle language
1
1
no
12
english
PLAYING A DVD-VIDEO DISC
..........................................Audio language
..........................................Audio system
..........................................Remaining time of title
..........................................Elapsed time
AUDIO
ENG
NOTE
- If the number has more than one digit, press the keys in
rapid succession.
MPEG
2 ch
7:24:59
7:59
- For more information about chapters, see “Checking the con-
tents of DVD-Video discs: Menus” p. 15.
MOVING TO ANOTHER TITLE
..........................................Resume
..........................................Total time
2:48:59
When a disc has more than one title (which you can see from
both the OSD and the player display if you press 9), you can
move to another title as follows:
PLAYING A TITLE
• Press T-C, then press Kbriefly during play to step forward
to the next title.
• With Autoplay on, play starts when you close the disc
drawer.
• Press T-C, then press Jbriefly during play to return to the
beginning of the current title. Press Jbriefly again to step
back to the beginning of the previous title.
• With Autoplay off, press 2.
NOTE
• To go directly to any title, press T-C, then enter the title
number using the numerical keys.
- Some DVD-Video discs carry their own Autoplay, in which
case play always starts automatically.
• The disc may invite you to select an item from a menu. If
the selections are numbered, press the appropriate numeri-
cal key; if not, use b o l rto highlight your selection,
and press OK.
NOTE
- If the number has more than one digit, press the keys in
rapid succession.
➜ ➜As the disc plays, the player display shows the current
- For more information about titles, see “Checking the con-
tents of DVD-Video discs: Menus” p. 15.
title and chapter, and the elapsed playing time.
• Play will stop at the end of a Title and this can result in
return to menu. To go on to the next Title, press 2.
PARENTAL CONTROL
• To stop play at any other time, press 9.
DVD video
• You can resume play from the point at which you stopped.
Press 2twice.
Parental Control is active.
Please enter your PIN
to play this disc
• The RESUME feature applies, not only to the disc in the
player, but also to the last four discs you have played.
Simply re-insert the disc, press 2if Autoplay is off, and
when you see the Resume icon on the screen,
press 2again.
1 eject disc 2
MOVING TO ANOTHER CHAPTER
• If you activate Parental Control, only discs that you have
already authorised as suitable for all ages can be played as
above.
When a title on a disc has more than one chapter (which you
can see from the player display), you can move to another
chapter as follows:
• To play any other DVD-Video disc, the OSD will ask you to
enter your Parental Control PIN code. When this has been
done, play starts automatically.
• Press Kbriefly during play to step forward to the next chap-
ter.
• To activate Parental Control, and to authorize discs, see
Activating Parental Control (p. 22).
• Press Jbriefly during play to return to the beginning of the
current chapter. Press Jbriefly again to step back to the
beginning of the previous chapter.
• To go directly to any chapter, enter the chapter number
using the numerical keys.
13
english
PLAYING A DVD-VIDEO DISC
• To return to normal play, press SHUFFLE briefly.
NOTE
- If you forget your PIN code, you can erase it when the code
is requested as above, by pressing 9 four times. Parental
Control will then be de-activated. To re-activate it, see
Activating Parental Control (p. 22).
REPEAT CHAPTER/TITLE/DISC
• To repeat the currently playing chapter, press REPEAT for
about 1 second:
STILL PICTURE AND STEP FRAME
➜ ➜REPEAT CHAPTER appears on the player display.
• To repeat the currenty playing title, press REPEAT a second
time for about 1 second:
• To get a still picture, press ;during play.
• To step forward to the next picture frame, press ;again.
• To return to play, press 2.
➜ ➜REPEAT TITLE appears on the display.
• To repeat the entire disc, press REPEAT a third time for
about 1 second;
SEARCH
➜ ➜REPEAT appears on the display.
• To exit Repeat mode, press REPEAT a fourth time for about
1 second.
• To search forwards or backwards through the disc at 4x
normal speed, press Kor Jfor about 1 second during play.
➜ ➜Search begins, and sound is muted.
A-B REPEAT
• To step up to 32x normal speed, press Kor Jagain.
To repeat or loop a sequence in a title:
• To go directly to 32x normal speed, hold down Kor Juntil
the
or
icon appears.
• Press A-B REPEAT briefly at your chosen starting point;
➜ ➜A appears on the player display.
• To return to 4x normal speed, press Kor Jagain.
➜ ➜Search speed and direction are indicated on the screen
• Press A-B REPEAT briefly again at your chosen end point;
for 2 seconds each time Kor Jis pressed.
➜ A-B appears on the display, and the repeat sequence
begins.
• To end the search, press 2, ;,
, or 9as desired.
• To exit the sequence, press A-B REPEAT briefly again.
CAMERA ANGLE
SLOW MOTION
• Press
muted.
to play video at 1/2 normal speed with sound
• If the disc contains sequences recorded from different cam-
era angles, the angle icon appears
number of available angles, and the
angle being shown. You can then change the camera angle
if you wish.
, showing the
3
7
• Press
• Press
• Press
again to play at 1/4 normal speed.
again to play at 1/8 normal speed.
again to play video at 1/2 normal speed
• To get another angle, press ANGLE
.
• Play speed is indicated on the screen for 2 seconds each
time the button is pressed.
➜ The angle icon will show the next angle.
• To go to any angle directly, enter the angle number using
the numerical keys (0-9).
• To exit slow motion mode, press 2, ;, 5/6or 9 as
desired.
NOTE
SHUFFLE
- The angle icon remains on the screen unless you turn off the
angle feature.
This shuffles the playing order of chapters within a title, if the
title has more than one.
+
• To turn off the angle feature, press OSD
:
➜ ➜the angle icon disappears.
• Press SHUFFLE briefly during play.
chapter
➜ ➜ appears on the screen for about 2 seconds.
shuffle
• To turn the angle feature on again, press angle
again:
➜ ➜the angle icon reappears.
• As each chapter is played, its number disappears from the
track calendar.
14
english
PLAYING A DVD-VIDEO DISC
CHANGING THE AUDIO LANGUAGE AND CHANNEL
CONFIGURATION
• Press T-C followed by MENU.
➜ ➜If the disc has a title menu, this now appears on the
OSD.
This changes the language and the audio channel configura-
tion when alternatives are available on the disc.
• To remove the title menu, press T-C again.
AUDIO
ENG
• Press AUDIO during play.
➜ The audio language and channel configuration icons
appear on the screen
MPEG
2 ch
for 2 seconds.
• Press AUDIO repeatedly to step through the options.
➜ ➜At each step, the language changes. If the sound con-
figuration changes too (for example from multichannel
to stereo) this is also indicated.
SUBTITLES
• When subtitles are available on a disc, you can turn them
....
on by holding SUBTITLE
subtitles appear.
down during play until the
....
• To step through the language options, press SUBTITLE
repeatedly.
....
• To turn the subtitles off, hold SUBTITLE
down again.
SCAN
Plays the first 10 seconds of each title on the disc.
• Press SCAN for about 1 second.
• To continue play at your chosen title, press SCAN again for
about 1 second or press 2.
CHECKING THE CONTENTS OF DVD-VIDEO DISCS:
MENUS
For titles and chapters, selection menus may be included on
the disc. The DVD’s player’s menu feature allows you to make
selections from these menus. Press the appropriate numerical
key; or use the b o l rkeys to highlight your selection,
and press OK.
• Press MENU.
➜ ➜If the present title has a “root” menu, this now appears
on the OSD.
• The “root” menu can list camera angles, spoken language
and subtitle language options, and chapters for the title.
• To exit the “root” menu, press MENU again.
15
english
PLAYING A VIDEO CD
PLAYING A DISC
PLAYING A VIDEO CD
• With Autoplay on, play starts when you close the disc
drawer.
You will recognize Video CDs by the logo.
Depending on the material on the disc (a
movie, video clips, a drama series, etc.) it
may have one or more tracks, and tracks
may have one or more indexes, as indi-
cated on the disc case. To make access easy and convenient,
your player lets you move between tracks, and between
indexes.
• With Autoplay off, press 2.
• As the disc plays, the display shows the current track, and
the elapsed playing time.
• Play will stop at the end of the disc.
• To stop play at any other time, press 9.
Some Video CDs have Playback Control (PBC), which is a pre-
defined playback sequence stored on the disc.
• You can resume play from the point at which you stopped.
Press 2twice.
NOTE
- During play, various icons will appear on the TV screen for
about 2 seconds to confirm that a function has been select-
ed. You can get rid of these icons by pressing OSD.
• The RESUME feature applies, not only to the disc in the
player, but also to the last four discs you have played.
Simply re-insert the disc, press 2if Autoplay is off, and
when you see the Resume icon on the screen
, press
2again.
- At any time during play, you can press OSD to call up the
Play Banner, which shows you which functions are active,
for about 2 seconds. To keep the Play Banner on the screen,
hold down OSD for a couple of seconds. To get rid of the
Play Banner, press OSD again.
MOVING TO ANOTHER TRACK
When a disc has more than one track (which you can see
from both the OSD and the player display if you press 9), you
can move to another track as follows:
- List of icons:
..........................................Play
..........................................Pause
..........................................Stop
• Press T-C, then press Kbriefly during play to step forward
to the next track.
• Press T-C, then press Jbriefly during play to return to the
beginning of the current track. Press Jbriefly again to step
back to the beginning of the previous track.
A - B
..........................................A-B repeat
..................................Search forward
..................................Search backward
• To go directly to any track, press T-C, then enter the track
number using the numerical keys.
1/2
1/4
1/8
..........................Slow forward
..........................................Repeat disc
..........................................Repeat track
..........................................Shuffle
NOTE
1
- If the number has more than one digit, press the keys in
rapid succession.
shuffle
TRACK
02
..........................................Track indication
MOVING TO ANOTHER INDEX
..........................................Index indication
..........................................Remaining time of title
..........................................Elapsed time
..........................................Total time
INDEX
004
When a track has more than one index (as indicated on the
disc case), you can move to another index as follows:
7:24:59
7:59
• Press Kbriefly during play to step forward to the next
index.
2:48:59
• Press Jbriefly during play to return to the beginning of the
current index. Press Jbriefly again to step back to the
beginning of the previous index.
• To go directly to any index enter the index number using the
numerical keys.
16
english
PLAYING A VIDEO CD
SEARCH
NOTE
- If the number has more than one digit, press the keys in
rapid succession.
• To search forwards or backwards through the disc at 4x
normal speed, press K or Jfor about 1 second during
play.
PLAYBACK CONTROL (PBC)
➜ ➜Search begins, and sound is muted.
• Insert a Video CD with PBC and press 2.
• To step up to 32x normal speed, press down K or Jagain.
• To go directly to 32x normal speed, hold down K or Juntil
➜ ➜The PBC menu appears on the TV screen.
• Go through the menu with the keys indicated on the TV
screen until your chosen passage starts to play. If a PBC
menu consists of a list of titles, you can select a title
directly.
the
or
icon appears.
• To return to 4x normal speed, press down K or Jagain.
➜ ➜Search speed and direction are indicated on the screen
for 2 seconds each time K or Jis pressed.
• Enter your choice with the J, K or numerical keys.
• Press 2to start play of the selected title.
• To end the search, press 2, ;,
or 9as desired.
• Press RETURN to go back to the previous menu.
SLOW MOTION
PARENTAL CONTROL
• Press
muted.
to play video at 1/2 normal speed with sound
video CD
• Press
• Press
again to play at 1/4 normal speed.
again to play at 1/8 normal speed.
Parental Control is active.
Please enter your PIN
to play this disc
• Press
again to play video at 1/2 normal speed.
• Play speed is indicated on the screen for 2 seconds each
time the button is pressed.
1 eject disc 2
• To exit slow motion mode, press 2, ;, 5/6or 9 as
desired.
• If you activate Parental Control, only discs that you have
already authorised as suitable for all ages can be played as
above.
SHUFFLE
• To play any other Video CD, the OSD will ask you to enter
your Parental Control PIN Code. When this has been done,
play starts automatically.
This shuffles the playing order of the tracks, if the disc has
more than one.
• Press SHUFFLE briefly during play.
• To activate Parental Control, and to authorize discs, see
Activating Parental Control (p. 22).
shuffle
➜ ➜ appears on the screen for about 2 seconds.
• As each track is played, its number disappears from the
track calendar.
NOTE
- If you forget your PIN code, you can erase it when the code
is requested as above, by pressing 9four times. Parental
Control will then be de-activated. To re-activate it, see
Activating Parental Control (p. 22).
•To return to normal play, press SHUFFLE briefly.
REPEAT TRACK/DISC
• To repeat the currently playing track, press REPEAT for
about 1 second:
STILL PICTURE AND STEP FRAME
➜ ➜REPEAT TRACK appears on the player display.
• To get a still picture, press ;during play.
• To step forward to the next picture frame, press ;again.
• To return to play, press 2.
• To repeat the entire disc, press REPEAT a second time for
about 1 second;
➜ ➜REPEAT appears on the display.
17
english
PLAYING A VIDEO CD
PLAYING AN AUDIO CD
• To exit Repeat mode, press REPEAT a third time for about 1
second.
PAUSE
• Press ;during play.
A-B REPEAT
• To return to play, press 2.
To repeat or loop a sequence:
SEARCH
• Press A-B REPEAT briefly at your chosen starting point;
➜ ➜A appears on the player display.
• To search forwards or backwards through the disc at 4x
normal speed, press K or Jfor about 1 second during
play.
• Press A-B REPEAT briefly again at your chosen end point;
➜ ➜A-B appears on the display, and the repeat sequence
➜ ➜Search begins, and sound is partially muted.
begins.
• To step up to 8x normal speed, press K or Jagain.
• To exit the sequence, press A-B REPEAT briefly again.
➜ ➜Search goes to 8x speed, and the sound is muted.
SCAN
• To go directly to 8x normal speed, hold down K or Juntil
the
or
icon appears.
Plays the first 10 seconds of each title on the disc.
• Press SCAN for about 1 second.
• To return to 4x normal speed, press K or Jagain.
• If the TV is on, search speed and direction are indicated on
the screen each time K or Jis pressed.
• To continue play at your chosen title, press SCAN again for
about 1 second or press 2.
• To end the search, press 2, ;or 9as desired.
PLAYING AN AUDIO CD
MOVING TO ANOTHER TRACK
Audio CDs contain music tracks only.
You will recognize CDs by their logo.
• Press Kbriefly during play to step forward to the next track.
• Press Jbriefly during play to return to the beginning of the
current track. Press Jbriefly again to step back to the
beginning of the previous track.
You can play audio CDs using the OSD or,
through a stereo system only, using keys on
the remote control and/or front panel.
• To go directly to any track, enter the track number using the
numerical keys.
PLAYING A DISC
• With Autoplay on, play starts when you close the disc
drawer.
NOTE
- If the number has more than one digit, press the keys in
rapid succession.
• With Autoplay off, press 2.
➜ ➜The disc starts to play; if the TV is on, the CD Play
SHUFFLE
screen appears on the OSD.
• Press SHUFFLE briefly during play.
➜ ➜The order of the tracks is changed.
audio CD
time
4
tracks
• As each track is played, its number disappears from the
player display.
69:16
12
1
2
3
5
6
7
8
9
10 11 12
• To return to normal play, press SHUFFLE briefly again.
7:24
4:19
REPEAT TRACK/DISC
• To repeat the current-playing track, press REPEAT for about
1 second:
➜ ➜Play will stop at the end of the disc.
• To stop play at any other time, press 9.
english
➜ ➜REPEAT TRACK appears on the display.
18
PLAYING AN AUDIO CD
• To repeat the entire disc, press REPEAT a second time for
about 1 second;
FTS (FAVOURITE TRACK SELECTION)
➜ ➜REPEAT appears on the display.
NOTE
- FTS Favourite Track Selections are compiled and played
using the OSD: ensure that the TV is on.
• To exit Repeat mode, press REPEAT a third time for about 1
second.
Playing an FTS program
A-B REPEAT
If Auto FTS is set to on, play of the FTS program starts imme-
diately. If Auto FTS is off:
To repeat or loop a sequence:
1 Insert a disc and go to Stop mode.
• Press A-B REPEAT briefly at your chosen starting point;
➜ ➜A appears on the player display.
2 Press lor rto start compiling FTS programs.
3 If available the excisting FTS program appears.
• Press A-B REPEAT briefly again at your chosen end point;
➜ ➜A-B appears on the display, and the repeat sequence
4 Follow instructions under “To exclude tracks” or “To select
tracks”.
begins.
• To exit the sequence, press A-B REPEAT briefly again.
To turn Auto FTS on and off, see Settings, p. 20
SCAN
Compiling an FTS program
FTS programs can be compiled by selecting the tracks you
want to play (“Track Selection”) or by excluding the tracks you
don’t want to play (“Excluding Tracks”)
Plays the first 10 seconds of each title on the disc.
• Press SCAN for about 1 second.
To exclude Tracks:
• To continue play at your chosen title, press SCAN again for
about 1 second or press 2.
1 Insert a disc and go to Stop mode.
2 Press l.
3 Use lor rto move to the first track number you want to
exclude.
4 Press o.
5 Repeat steps 3 and 4 to exclude further track numbers in
the same way. If you change your mind, you can re-include
any track number by moving back to it and pressing b.
6 To clear your whole selection and start again, press 9.
audio CD
exclude tracks
1
2
3
4
5
6
7
7
8
9
10 11 12 13 14 2
play
exclude
play selection clear selection 9
2
19
english
PLAYING AN AUDIO CD
SETTINGS
To select Tracks:
SETTINGS
1 Insert a disc and go to Stop mode.
In the settings menu, you can customize your player to suit
your own particular requirements.
2 Press r.
3 Use lor rto move to the first track number you want to
In Stop mode:
select.
4 Press b.
• Press SETUP to obtain the Settings screen.
5 Repeat steps 3 and 4 to select further track numbers in the
same way. If you change your mind, you can de-select track
numbers in reverse order by pressing oas required.
video CD
settings
audio
subtitle
english
english
Not Active
16:9
6 To clear your whole selection and start again, press 9.
parental control
TV shape
audio CD favourite tracks
auto play
on
on
auto FTS
3
1
10
2
6
3
11
4
5
5
favourite
• Move to the function you want to change using obthen
6
7
8
9
10 11 12 13 14 2
use lrto scroll to your preferred option.
disc
play selection
clear selection 9
2
settings
video CD
all
digital output
video shift
-
+
When your FTS program is complete, press 2to start play, or
RETURN to go back to Stop mode. In either case, the FTS pro-
gram will be automatically memorized.
english
on
OSD language
3D sound
NOTE
- You can have a total of at least 100 FTS programmed discs.
If you exceed that number, the least frequently played FTS
program(s) are automatically deleted.
• To exit Settings menu, press RETURN or SETUP.
Audio
The sound will be in the language you choose provided this is
available on the disc in play. If not, speech will revert to the
first spoken language on the disc.
Subtitle
The subtitles will be in the language you choose provided this
is available on the disc in play. If not, subtitles will revert to
the first subtitle language on the disc.
Parental Control
Parental Control is described separately under ‘Parental
Control’ p. 22.
20
english
SETTINGS
Factory setting centers the video on your TV screen. Use this
setting to personalize the position of the
TV Shape
Factory setting 16:9 (wide screen). If you have a regular (4:3)
TV, you can choose Letterbox for a ‘wide-screen’ picture with
black bars top and bottom, or Pan Scan, for a full-height pic-
ture with the sides trimmed. If a disc has Pan Scan, the pic-
ture then moves (scans) horizontally to keep the main action
on the screen.
picture on your TV by scrolling it to the left or right.
OSD Language
The player’s on-screen display will be in the language you
choose.
3D Sound
To enjoy multichannel sound even on two speakers, turn
3D Sound on.
Auto Play
Factory setting ON means that discs starts to play automati-
cally when inserted. Set to OFF if you prefer to start play
manually.
Auto FTS
Factory setting ON means that when a disc with an FTS pro-
gram (see ‘Compiling an FTS program p. 19) is inserted, the
FTS program automatically starts to play. Set to Off if you pre-
fer to control FTS play manually.
Digital Output
Factory setting OFF means that there is no audio signal at the
digital output. If you are connecting equipment with a digital
input, change the setting to ALL.
If your equipment doesn't include a digital decoder, (e.g. digi-
tal speakers) set the digital output to PCM.
Video Shift
21
english
is this
disc authorized?
PARENTAL CONTROL
PARENTAL CONTROL
when Parental Control is active
ACTIVATING PARENTAL CONTROL
This can only be done in Stop mode
1 Press SETUP to obtain the Settings menu.
2 Move to Parental Control using ob.
3 Press lor rto change Parental Control to Active.
insert disc
open tray
NOT OK
enter pin
OK
NO
TRY 3X
4 You will be asked to enter a 4-digit pin code of your own
choice, and then to confirm your choice.
YES
YES
5 This code must then be entered to play any DVD-Video or
Video CD disc, unless you have previously authorized the
disc as suitable for all ages.
normal operation
PRESS "STOP"
6 To de-activate Parental Control repeat the above procedure.
DVD video
titles
AUTHORIZING DISCS
time
09:16
45
1
2
3
4
5
6
7
8
9
10 11 12 13
1 Insert the disc you wish to authorize and close the tray.
eject disc 1
2
parental control
➜ ➜The OSD will ask for your pin code.
2 Enter your pin code.
3 Press 9.
select
Parental Control
change
autorization
4 Select Parental Control on the OSD by pressing r
Enter Pin Code
➜ ➜The OSD will ask for your pin code.
ENTER
PIN CODE
5 The disc is now authorized, and will play in the normal way,
without the pin code.
DVD video
This disc is not authorised
to BEVIEWED without PIN.
Please enter your PIN
OK
NOT
OK
To cancel your authorization, repeat steps 4 and 5.
to authoeise viewing
1
back
2
NOTE
- You can have a total of 50 authorized discs. If you exceed
that number, the least frequently played disc(s) are automat-
ically de-authorized.
22
english
BEFORE REQUESTING SERVICE
NO RETURN TO START-UP SCREEN WHEN DISC IS
REMOVED..................................................................................
BEFORE REQUESTING SERVICE
• Reset by switching the player off, then on
again.
• Check to see if the program requires
another disc to be loaded.
If it appears that the DVD-Video player is faulty, first consult
this checklist. It may be that something simple has been over-
looked. Under no circumstances attempt to repair the system
yourself; this will invalidate the warranty.
THE PLAYER DOES NOT RESPOND TO THE REMOTE
CONTROL ..................................................................................
Look for the specific symptom(s). Then perform only the
actions listed to remedy the specific symptom(s).
• Aim the remote control directly at the sen-
sor on the front of the player.
• Avoid all obstacles which may interfere
with the signal path.
SYMPTOM
• Remedy
• Inspect or replace the batteries.
NO POWER................................................................................
DISTORTED OR BLACK AND WHITE PICTURE WITH DVD
OR VIDEO CD DISC..................................................................
• Check if the on/off button on the front of
the player is set to on.
• The disc format is not according to the TV-
set used (NTSC/PAL).
• Check if both plugs of the mains cord are
properly connected.
• Check if there is power at the AC outlet by
plugging in another appliance.
NO AUDIO AT DIGITAL OUTPUT ..........................................
• Check the digital connections.
• Check the settings menu to make sure that
the digital output is set to on.
• Check if the audio format of the selected
audio language matches your receiver
capabilities.
NO PICTURE..............................................................................
• Check if the TV is switched on.
• Select the same channel and source on the
TV as on the player.
• Check the video connection.
BUTTONS DO NOT WORK......................................................
DISTORTED PICTURE..............................................................
• Reset by switching the player off, then on
again.
• Check the disc for fingerprints and clean
with a soft cloth, wiping from centre to
edge.
• Sometimes a small amount of picture
distortion may appear.This is not a
malfunction.
CLEANING DISCS
COMPLETELY DISTORTED PICTURE WITH PLAYER MENU
Some problems occur because the
disc inside the player is dirty. To avoid
such problems clean your discs regu-
larly with a soft cloth. Wipe the disc
from the center out.
• NTSC/PAL switch in wrong position.
NO COLOUR IN PICTURE WITH PLAYER MENU................
• NTSC/PAL switch in wrong position.
DISC CAN’T BE PLAYED ........................................................
• Ensure the disc label is upwards.
• Clean the disc.
• Check if the disc is defective by trying
another disc.
CAUTION
Do not use solvents such as
benzine, thinner, commercially
available cleaners, or anti-static
spray intended for analog discs.
NO SOUND................................................................................
• Check audio connections.
• If using a HiFi amplifier, try another sound
source.
DISTORTED SOUND FROM HIFI AMPLIFIER ......................
• Check that the player’s audio L/R output is
not connected to the amplifier’s phono
input.
23
english
BEFORE REQUESTING SERVICE
DIAGNOSTIC PROGRAM
If the fault persists, you can run the Diagnostic Program in the
player.
INSTRUCTIONS:
1 Switch the player off.
2 Hold both OPEN/CLOSE and ; pressed and switch on the
player.
➜ ➜‘BUSY’ appears on the display together with a counter.
The counter indicates the termination of the test when it
reaches zero.
➜ ➜After a few minutes, ‘BUSY’ changes to ‘ERROR’ or
‘PASS’.
3 Swith off the player to exit the Diagnostic Program.
4 ‘ERROR’ indicates that your player needs repair. Contact your
dealer or the Philips Consumer Information Center (CIC).
5 ‘PASS’ indicates that the Diagnostic Program has found no
fault. In this case, the malfunction may be due to misinter-
pretation of the operating intructions, or an unsuitable disc,
or incorrect connections. If you still cannot solve the prob-
lem, contact your dealer or the Philips CIC.
6 You will find the phone number of the Philips CIC in your
Warranty Booklet.
24
english
|